• +44 (0)1788 542271

6 Advantages of Using a Hydraulic Press


With hydraulic presses being one of the most common machines in the industrial world, there are many advantages to this technology: Cost-Cutting They have a significant cost advantage over mechanical presses; if they experience breakdowns, replacement parts are inexpensive and the work is simple. Also, they have lower tool costs due to the fact that […]

Read full post.

Why Choose Powder Coating?


The use of powder coating over the years is becoming far superior than the common choice of paint. Powder coating is a modern development, reaching its peak of popularity in the 1950’s. It provides a protective, but also decorative, finish to any kind of metal for any kind of industry or domestic circumstance. A combination […]

Read full post.

Modernise Your Old Press Brake


If your old press brake is beyond repair, there is no choice but to scrap it. But, if it is just run down, make sure you weigh up your options of either selling it and installing a new one, or increasing the productivity by retrofitting and modernising it. Consider and add up how much it […]

Read full post.

What A Hydraulic Press Can Do For You


A hydraulic press is a very common machine in the industrial world. The system works by using the pressure that is applied to fluids within the two cylinders, and exerting it into a larger force; the heavier the pressure, the larger the force. Despite this simple technology, a hydraulic press can be used for a […]

Read full post.

New distributor for Eastern Europe


AW Precision and the company UAB Forvele have signed a distrbution agreement for our Punch and Die products for East Europe. If you are looking for local support with global reach please contact the team at UAB Forvele http://www.forvele.lt/

Read full post.

Optimising Laser Cut Quality


Nowadays, laser cutting machines have never been more productive, but that doesn’t mean that the cut quality is always up to standards. Obviously, edge quality is completely objective so there is no way to accurately measure it, but there are elements that can have a significant effect on these results. Material With the increase in […]

Read full post.

Find the Right Laser Cutting Machine


Laser cutting technology is one of the most accurate and consistent techniques in the process of metal fabrication. The equipment has evolved massively over the years which has meant there are a lot more options available nowadays; this makes the decision much harder, so here are a few things to consider. Choose the Type of […]

Read full post.

How to Solve Cutting Punch Failures


Over the years, the development of high-strength materials has increased, but consequently, this has led to more cutting punch failures. Trimmed, chipped, and broken sections are just a few results that stem from this issue. In order to solve this, you need to consider a number of factors: 1. The Dynamics of Metal Cutting It […]

Read full post.

What Are the Best Coatings to Improve Tooling Life?


Tools that undergo aggressive operations demand long-lasting, durable surfaces in order to produce high quality results every time. It has been said that tool coatings can help extend tooling life by a significant amount, and some procedures would be difficult to do without them. Here are a few coatings that can improve tooling life: Titanium […]

Read full post.

Press Brake Safeguarding


No matter how long you have had your press brake for, how often you use it, or if you have had relevant safeguarding before, it is vital that you are kept aware of the dangers press brakes can cause. Accidents and injuries in the workplace are often the result of these machines, but there are […]

Read full post.

Sign up to our newsletter

You can opt-out at any time using the ‘unsubscribe’ link in our emails or via the opt out page on this website.